2

Applicazione di materiale PET

2023-12-07 11:45

The glass transition temperature of PET is about 165°C, and the crystallization temperature range of the material is 120~220°C.


PET is highly hygroscopic at high temperatures. Glass-fiber-reinforced PET materials are also very susceptible to bending deformation at high temperatures. The degree of crystallization of the material can be increased by adding a crystallization enhancer.Transparent products processed with PET have gloss and thermal twist temperatures. Special additives such as mica can be added to PET to minimize bending distortion.If a lower mold temperature is used, it is also possible to obtain a transparent product with unfilled PET material.


The injection molding method is mainly used for the molding of enhanced PET and usually uses a screw injection machine.Screws generally need to be hardened to avoid wear and tear after long-term use. The length of the nozzle hole of the injection machine should be as short as possible, and its diameter should be controlled at about 3mm. Reinforced PET has a melting point of up to 260°C, and a heater with a high power should be installed to prevent the nozzle from clogging. In addition, the tip of the nozzle hole is preferably machined into a reverse cone type, so that the flow channel and the molten material in the nozzle can be easily cut off.

Ricevi l'ultimo prezzo? Ti risponderemo al più presto (entro 12 ore)
This field is required
This field is required
Required and valid email address
This field is required
This field is required
For a better browsing experience, we recommend that you use Chrome, Firefox, Safari and Edge browsers.